Socket Mobile Cordless Hand Scanner - Manual (Page 28)

STEP 2: Charge the Scanner
Use the included AC adapter to charge the Cordless Hand Scanner. The
scanner’s NiMH batteries must be charged for at least 4 hours before the
first use. The Battery Status LED will emit a solid red light while charging,
and turn off when the batteries are fully charged.
Do not attempt to charge alkaline batteries — this may
cause alkaline batteries to leak and damage the CHS.
The red Battery Status LED will not function properly if
standard AAA alkaline batteries are being used.
STEP 3: Uninstall Other Scanning Software
Delete any bar code scanning software you may already have installed on
your device.
1. Tap Home, then tap Menu.
2. In the App menu, tap Delete.
3. In the Delete screen, scroll to select your bar code scanning application.
Tap Delete. In the confirmation screen, tap Yes.
28