Socket Mobile Cordless Hand Scanner - Manual (Page 40)

STEP 2: Charge the Scanner
Use the included AC adapter to charge the Cordless Hand Scanner. The
scanner’s NiMH batteries must be charged for at least 4 hours before the
first use. The Battery Status LED will emit a solid red light while charging,
and turn off when the batteries are fully charged.
WARNING: Do not attempt to charge alkaline batteries —
this may cause alkaline batteries to leak and damage the
CHS.
The red Battery Status LED will not function properly if
standard AAA alkaline batteries are being used.
STEP 3: Uninstall Other Scanning Software
Delete any bar code scanning software already on your computer.
1. Make sure the bar code scanning software is closed.
2. Click Start | Control Panel | Add or Remove Programs.
3. Select the bar code scanning software and click Remove.
4. Follow the instructions on your screen to remove the software.
40