Silvercrest KH2150 - Manual (Page 13)

SYSTEM-SETUP overview
VOL/MUTE SETUP
All devices use their own volume control, if available.
If a video device, such as a VCR or DVD player, does not have
its own volume control, the volume control of the television
device is automatically used ("punch-through function").
The function VOL/MUTE SETUP allows you to set the volume
control to operate through a specific device, such as the tele-
vision.
1. Hold the
S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/MUTE SETUP appears
in the LCD display (2).
4. Press the right arrow button (6). ALL VOL.SET appears in
the LCD display (2).
5. Press the right arrow button (6). ALL VOL. MODE? appears
in the LCD display (2).
6. Press the desired device button (4), such as TV. PLEASE
WAIT... then SUCCESS appears in the LCD display (2).
The volume for all devices is now controlled via the TV.
11
IB_KH2150_JOE23594_LB3bcI.qxd 05.08.2008 16:52 Uhr Seite 11