Silvercrest KH2150 - Manual (Page 15)

4. Press the down arrow button (6) repeatedly until TIME-
SETUP appears in the LCD display (2).
5. Press the right arrow button (6). TIME? 24HR 12:00 appears
in the LCD display (2). The message 24HR blinks.
Note:
Press the up or down arrow button for (6) 12-hour display. All
other settings are explained using 24-hour display as example.
6. Press the right arrow button (6). TIME? 24HR 12:00
appears in the LCD display(2). The hours value blinks.
7. Press the up or down arrow button (6) to set the hours.
8. Press the right arrow button (6). The minutes value blinks.
9. Press the up or down arrow button (6) to set the minutes.
10. Press the right arrow button (6). SUCCESS appears in
the LCD display (2).
11. Press the EXIT button (8) repeatedly until the standard
display appears in the LCD display (2).
Note:
If no button is pressed for approx. 30 seconds, the message
TIMEOUT appears in the LCD display (2). Then the standard
display is shown automatically.
DATE-SETUP
Set the year, month, date and day of the week.
1. Hold the
S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/MUTE SETUP appears
in the LCD display (2).
4. Press the down arrow button (6) repeatedly until DATE-
SETUP appears in the LCD display (2).
5. Press the right arrow button (6). YEAR? 2006 appears in
the LCD display (2). The numbers for the year blink.
6. Press the up or down arrow button (6) to set the year.
7. Press the right arrow button (6). MONTH? 1 appears in
the LCD display (2). The month value blinks.
8. Press the up or down arrow button (6) to set the month.
9. Press the right arrow button (6). DATE? 1 appears in the
LCD display (2). The date value blinks.
10. Press the up or down arrow button (6) to set the day.
11. Press the right arrow button (6). DAY? SUN appears in
the LCD display (2). The letters for the day of the week
blink.
12. Press the up or down arrow button (6) to set the day of
the week.
13. Press the right arrow button (6). SUCCESS appears in
the LCD display (2).
14. Press the EXIT button (8) repeatedly until the standard
display appears in the LCD display (2).
13
IB_KH2150_JOE23594_LB3bcI.qxd 05.08.2008 16:52 Uhr Seite 13