Silvercrest KH2150 - Manual (Page 27)

LEARN SETUP overview
MODE LEARN
Note:
Execute "ALL LEARN CLEAR“ before executing "MODE LEARN“
for the first time. See section "ALL LEARN CLEAR“.
Learning the button signals of an original remote control.
1. Hold the
S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6) repeatedly until LEARN-
SETUP appears in the LCD display (2).
3. Press the right arrow button (6). MODE LEARN appears
in the LCD display (2).
4. Press the right arrow button (6). MODE KEY appears in
the LCD display (2).
5. Press the desired device button (4). LEARN KEY appears
on the LCD display (2).
6. Press the desired button on the universal remote control.
For example, the playback button (14) PLAY . LEARNING
appears in the LCD display (2).
25
IB_KH2150_JOE23594_LB3bcI.qxd 05.08.2008 16:52 Uhr Seite 25