Silvercrest KH2150 - Manual (Page 17)

2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/MUTE SETUP appears
in the LCD display (2).
4. Press the down arrow button (6) repeatedly until SYSTEM-
RESET appears in the LCD display (2).
5. Press the right arrow button (6). CONFIRM RESET appears
in the LCD display (2).
6. Press the right arrow button (6). PLEASE WAIT... appears
in the LCD display (2). All system settings are reset to the
factory defaults.
CODE-SETUP – Device code
To control a device with the remote control, a device code
must be entered for every device.
The device codes can be entered as follows:
LIST CODES
From the internal device list of the remote
control.
ENTER CODES From the additional manual with the device
codes.
SEARCH CODES Automatically or manually search for
codes.
BRAND CODES From the table of manufacturer codes.
LIST CODES
Select the device code for a device (TV, VCR, LD, DVD etc.)
from the internal list on the remote control.
Note:
To conclude your input, press the EXIT button (8).
1. Switch on the device for which you would like to program
the remote control.
2. Hold the S button (5) pressed until CODE-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). LIST CODES appears in
the LCD display (2).
4. Press the right arrow button (6). MODE KEY? appears in
the LCD display (2).
5. Press the desired device button (4). DEVICE? TV appears
in the LCD display (2).
Note:
For a television, press the device button TV (4), then continue
with step 7.
6. Press the up or down arrow button (6). The next device
appears in the LCD display (2).
15
IB_KH2150_JOE23594_LB3bcI.qxd 05.08.2008 16:52 Uhr Seite 15