Speco Technologies SIPMPBVFH - Manual (Page 32)

2-28
Speed & Duplex
Click the [Speed & Duplex] item in the network section to display the ”Speed and
Duplex” Page. Refer to the table below for how to configure each setting.
Parameters Description
Network
speed
This item lets you select the network transmission speed.
You can select from
1. Auto detect (default setting)
2. 100Mbps / Full duplex
3. 100Mbps / Half duplex
4. 10Mbps / Full duplex
5. 10Mbps / Half duplex
Click the [Apply] button to confirm the settings or click the [Reset] button to
re-enter the parameters.