Speco Technologies SIPMPBVFH - Manual (Page 54)

2-50
Parameters Description
Enable Check this box to enable each OSD / Privacy mask region
OSD /
Privacy mask
Each region can be in one of two types. OSD (On Screen
Display) or Privacy mask
Color
(Privacy
mask)
This determines the color of the Privacy Mask Area. You may
choose between Black, Green, Red and Blue.
Setup
Click this checkbox to enable Privacy mask area setup. Click and
drag the adjust square at the lower right to change dimensions,
click and drag the adjust column at the top to move. (Similar to
Motion Detection Region)
Color(OSD)
This determines the color of the OSD Text. You may choose
between Black, Green, Red and Blue.
Transparent
This number determines the level of transparency for this OSD
Text. 1 means that the background between the texts will not be
visible, while 100 means the background will show through the
OSD text.
Position Select the location where the text will appear in the image.
String
This is where you enter the user defined string (%U) as described
in the next section
Format
This controls what is shown in the OSD text. You can click the
Format Notice to the corner for a full list of available parameters.
The OSD text is primarily based upon this field.
Format
Notice Click here to see the syntax list of how to configure the OSD
text.
Click the [Apply] button to confirm the settings or click the [Reset] button to
re-enter the parameters.