Speco Technologies SIPMPBVFH - Manual (Page 57)

2-53
Column Description
System info
It shows the firmware version, MAC address, production ID, and
factory default type of IP device.
WAN status
It shows the WAN port’s IP address, netmask, gateway, DNS
server, DDNS host and connection status.
System log
It shows the system event. This column is very useful to as a
diagnostic tool.
Click [Parameter List] where you may see all configurations of the IP device.
Click [Server Report] to export related information of the IP device while
reporting a support to your support channel.
Factory Default
Click the [Factory Default] item to display the “Factory Default Page”.
If you want to keep network settings and restore other settings to factory default, please
click radio box . If you click instead , all the settings would be lost. You will
have to use factory default IP setting to connect to this camera. Please refer to previous
login section.
If you want to reset all setting to default, click to select this radio box .
Click the [Apply] button to show a warning dialog that reminds you again before
restoring the device to factory default.