Speco Technologies SIPMPBVFH - Manual (Page 37)

2-33
2.3.5 Video & Audio
Click the [Video & Audio] item on the “Setup Page”.
Please note that some elements may not appear on all models.
Video
Click the [Video] item to display the “Video Page”. The functions here are grouped
under different tabs. Starting from firmware version 4.07, there are two sets of all settings
in the Video section, one for day time and one for nighttime. The camera will
automatically load different profile based upon the current Day/Night status. This
function allows for tailored configuration so that the camera may perform optimally
under all lighting conditions.
Image (CMOS Models)
This tab concerns the general video settings. Please refer to the table below for functions.