Samsung SF 4700 - Manual (Page 80)

4.19 Stand-alone Fax
One-Touch Dialing
One-Touch dialing lets you use any of the 10 one-touch buttons to
automatically dial a number.
Storing a Number for One-Touch Dialing
1. Press and hold one of ten one-touch buttons for about 2 seconds. The
display shows `Txx:’, where `xx’ represents the selected one-touch
button number.
If a number has already been stored in the location you chose, the
display shows the number. To edit the number, see the next page.
If you press and hold the button used for group dial number, the
display shows ‘GROUP NO. IS REGISTERED’, then asks you to press
another one-touch button.
2. Enter the number you want to store by using the number keypad, then
press Start/Enter.
To insert a pause between numbers, press Redial/Pause; a ‘P’
appears on the display.
If you make a mistake while entering a number, press Search/Delete
and re-enter the correct number.
Editing Name
If you make a mistake while entering a number or name, move the
cursor under the incorrect digit by #. Then, press the correct number to
change, or press Search/Delete to delete the number.
Inserting a Pause While Entering a Number
Some telephone systems require an access code (9, for example) and
listen for a second dial tone before dialing an outside number. In such
cases, you must insert a pause in the number when setting up a one-
touch or a speed dial number.
To insert a pause, press Redial/Pause while entering the number.
When you dial a number, the dialing process pauses for a specified time
at the point where you pressed Redial/Pause.
For a longer pause, press Redial/Pause twice.
Txx:_