Samsung SF 4700 - Manual (Page 90)

4.29 Stand-alone Fax
Group Dialing (for Multi-Address Transmission)
Multiple one-touch and speed dial numbers can be registered as a group.
By using the group number, you can send a document to multiple parties
in a single operation. The machine will dial the remote numbers in stored
sequence. If the number is busy, the machine will dial the next stored
number. After dialing all of the stored numbers, the unit will
automatically redial any number that was busy. Before you can use this
feature, you must program the group numbers desired.
Storing One-Touch or Speed Dial Numbers for Group
Dialing
1. Press Advanced Fax on the front panel.
The display shows the first menu; DELAY TX.
2. Press Menu until ‘GROUP NO. SET’ appears, and press Start/Enter.
3. Press one of the ten one-touch buttons (1 through 10) that you want
to use for group dial.
4. The display asks you to confirm that you use this button for group
dialing.
Press Start/Enter to confirm.
If you do not want to use the one-touch number, select NO pressing
Option and Start/Enter. Then,press another one-touch button.
Note: If the button you chose has already been used for one-touch
dialing or group dialing, the display warns the one-touch number
is used.
Select the desired option by pressing Option. To replace that
number and continue, select RENEW and to start over with a
different location, select OTHER. When the desired option is
displayed, press
Start/Enter .
5. The display asks you to press a one-touch button or to enter a 2-digit
speed dial number that you wish to include in the group.
GROUP NO : G01
YES
GROUP 01 USED
RENEW