Samsung SF 4700 - Manual (Page 81)

4.20 Stand-alone Fax
3. The display asks you to enter a name. For information on how to
enter names, see page 4.17.
Or, if you do not want to assign a name, skip this step.
If you assign a name to the number, the name appears on the display
when you press the one-touch button.
4. Press Start/Enter when the name appears correctly or without
entering a name. The display asks you to press another one-touch
number.
5. To set another one-touch number, press the desired one-touch button
and repeat steps 2 through 4.
Or, to return to Standby mode, press Stop.
Editing a Number for One-Touch Dialing
1. Press and hold the one-touch button where the phone number has
been stored.
2. Press Option to select the desired option.
To register a new number to the one-touch number, select RENEW
and enter the new number.
If you want to set another one-touch number, select OTHER and
repeat steps 2 through 4 of ‘Storing a Number for One-Touch Dialing.’
3. When you have finished editing, press Start/Enter.
Sending a Fax Using a One-Touch Number
1. Load the document face down with the top edge first going into the
document feeder.
2. Press the one-touch button (1 through 10) where you stored a
number. The number will be automatically dialed and the document
transmitted when the remote fax machine answers.
T01:025413000
RENEW