Samsung SF 4700 - Manual (Page 83)

4.22 Stand-alone Fax
4. To assign a name to the number, enter the desired name. For
information on how to enter names, see page 4.17.
If you do not want to assign a name, skip this step.
5. Press Start/Enter when the name appears correctly or simply without
entering a name. The display asks you to select another location.
6. To store more speed dial numbers, repeat steps 2 through 5.
To return to Standby mode, press Stop.
Editing a Number for Speed Dialing
1. Press and hold Speed for 2 seconds.
2. Enter the 2-digit location number where the phone number you want
to edit has been stored, then press Start/Enter. The display shows
the number.
3. Press Option to select the desired option.
To store a new number to the speed dial number, select RENEW and
enter the new number.
If you want to set another speed dial number, select OTHER and
repeat steps 2 through 4 of ‘Storing a Number for Speed Dialling.’
4. When you have finished editing, press Start/Enter.
Sending a Fax Using a Speed Number
1. Load the document face down with the top edge first going into the
document feeder.
2. Press Speed, then enter a 2-digit speed dial location number.
3. Press Start/Enter to dial the number. The number will be
automatically dialed and the document transmitted when the remote
fax machine answers.
S01:05512637522
RENEW