Sony CHC-TB20 - Manual (Page 20)

20 GB
Recording to a tape (continued)
Timer-recording radio
programs
To timer-record, you must first preset the radio
station (see “Presetting radio stations” on page
13) and set the clock (see “Setting the clock”
on page 8).
1
Tune in the preset radio station (see
“Listening to the radio” on page 15).
2
Press CLOCK/TIMER SET on the
remote.
“DAILY SET?” appears.
3
Press . or > on the remote to
select “REC SET?”, then press ENTER/
YES.
“ON” appears and the hour indication
flashes.
4
Set the time to start recording.
Press . or > on the remote to set the
hour, then press ENTER/YES.
The minute indication flashes.
Press . or > on the remote to set the
minute, then press ENTER/YES.
5
Set the time to stop recording following
the procedure in step 4.
6
Insert a recordable tape.
Recording starts from the top side. Insert a
tape with the side you want to record on
facing up.
7
Press ?/1 to turn off the system.
Recording a CD by specifying
track order
— Program Edit
1
Load a CD and load a recordable tape.
2
Program CD tracks following step 2 to 6
in “Programing CD tracks” on page 10.
3
Press CD SYNC.
The tape deck stands by to record. The CD
player stands by for playback.
4
Press TUNER MEMORY/DIRECTION
repeatedly to select g to record on
one side. Select h (or j ) to record
on both sides.
5
Press REC PAUSE/START.
Recording starts.
Tip
To check the required tape length for recording a CD,
press EDIT after you have loaded a CD. The required
tape length for the currently selected CD appears,
followed by the total playing time for side A and side
B respectively (
Tape Select Edit ).
Note
You cannot use Tape Select Edit for discs containing
over 20 tracks.