Sherwood V-756 - Manual (Page 16)

Playback of the selected item starts.
When using the NUMERIC buttons to select an item, it may be necessary, with some discs, to also press the
PLAY (or ENTER) button to start playback of your selection.
When the selected item contains the subitems, repeat the above step until the preferred item is selected.
16
ENGLISH
To start playback from the menu
To select the preferred item, tilt the CURSOR/ENTER button in the desired direction and press the
CURSOR/ENTER button (or PLAY button), or press the NUMERIC buttons.
To stop playback and return to the menu display
In case of DVD Videos,
Press the TITLE, MENU or RETURN button on the remote control.
(Which button is pressed differs depending on the disc used.)
Playback is suspended and the menu display appears.
Notes :
The disc continues to rotate while the menu display appears even after the unit has finished playback of an
item. When no further selections are to be played back, be sure to press the STOP button to clear the menu
display.
A TV screen may be burned in if a static picture is displayed for too long a time.
To prevent this, turn off the TV temporarily when a static picture, such as an on-screen display or menu, will be
displayed for over 10 minutes.
When you press a button, if the corresponding operation is prohibited by the unit or the disc, will appear on
your TV screen.
In case of use of the NUMERIC buttons.
when selecting “12” when selecting “3”
RC RC
RC RC RC