Sherwood V-756 - Manual (Page 41)

41
If the programmed items are all played back, the
program menu mode is resumed.
Correcting any wrong programmed item.
5
Repeat the above steps until your selections is completed.
6
Start the programmed playback in the desired sequence.
1
In the program menu mode, move to the program number you want by tilting the
CURSOR/ENTER button repeatedly.
2
Replacing the wrong program item, performing the steps and in Playing back your
selections in the preferred sequence procedure on the previous page.
Clearing the programmed items.
To clear a specific item
To clear all programmed items.
Open the disc tray or turn the power off to the standby mode.
The item you want is cleared.
Then all the programmed items are cleared.
1
In the program menu mode, move to the program number you want by tilting the
CURSOR/ENTER button repeatedly.
2
Clear the item you want.
Main unit
RC
RC RC
Main unit
or
or or
RC
Continued
ENGLISH