Sherwood V-756 - Manual (Page 29)

29
SETTING THE SYSTEM
You can use the unit as DVD player or as a digital surround sound decoder (or both).
For use as a surround sound decoder, be sure to connect the DIGITAL OUTs of the associated source unit to
the DIGITAL INs of this unit.
(Refer to CONNECTING TO ADDITIONAL COMPONENT WITH VIDEO AND DIGITAL OUTS on page 7.)
Depending on your use, tilt the CURSOR/ENTER button upward or downward to select the item, then
press the CURSOR/ENTER button.
Note :
When the EXT OPTICAL or EXT COAXIAL is seleted to use this unit as a built-in decoder, only the
AUDIO SETUP on the SETUP menu can be selected and most of the function buttons such as PLAY,
OPEN/CLOSE,etc. for DVD player operation will not work.
To use as a DVD player
To use as a surround sound decoder for the digital audio signal from
the OPTICAL DIGITAL IN of this unit.
To use for the digital audio signal from the COAXIAL DIGITAL IN.
The selected item is highlighted.
For the lower
For the upper
S Y S T E M S E L E C T : +
D V D P L A Y
E X T O P T I C A L
E X T C O A X I A L
R E T U R N : S E T U P : F I N I S H
RC RC
ENGLISH