Sherwood V-756 - Manual (Page 32)

32
SETTING THE AUDIO SETUP
To select the bitstream or linear PCM as digital audio signal format
To select a preferred dynamic range control
To select a preferred surround sound
To select a preferred speaker option
For your reference, the following chart shows the
relationship between types of playback discs and
digital audio output signals.
When the DIGITAL OUTs of the unit are connected to the corresponding DIGITAL INs of an amplifier with built-
in decoder, etc., this item should be set correctly.
1
Tilt the CURSOR/ENTER button upward or downward to select the DIGITAL OUTPUT, then
press the CURSOR/ENTER button.
2
Tilt the CURSOR/ENTER button upward
or downward to select the correct digital
audio signal format, then press the
CURSOR/ENTER button.
Notes :
When the DIGITAL OUT of this unit is connected to the DIGITAL IN of an amplifier which does not contain a
Dolby Digital, DTS or MPEG Multichannel decoder,etc.(which processes the bitstream signal), you should set
the DIGITAL OUT to LINEAR PCM. If not, loud noise may be heard from the speakers, that could be harmful to
your ears and damage the speakers.
When connecting to the DIGITAL IN of an MD or CD recorder for digital recording, you should set the DIGITAL
OUT to LINEAR PCM. If not, the digital recording will not perform properly.
When the DIGITAL OUT is set to LINEAR PCM, the multi-channel signal format (front L, center, front R, rear L
and R) is mixed down to 2 channels and converted to a linear PCM signal.
The selected format is highighted.
DVD Video with 48 kHz,
16 bit linear PCM
DVD Video with 48 kHz,
20/24 bit linear PCM
DVD Video with 96 kHz,
linear PCM
DVD Video with DTS
DVD Video with Dolby
Digital
DVD Video with MPEG
audio
Audio CD
Audio CD with DTS
DTS bitstream
48 kHz, 16 bit linear
PCM
48 kHz, 20/24 bit linear
PCM
48 kHz, 24 bit linear
PCM
Dolby Digital bitstream
MPEG bitstream
44.1 kHz, 16 bit linear
PCM
DTS bitstream
48 kHz, 16 bit linear
PCM
48 kHz, 20 bit linear
PCM
48 kHz, 24 bit linear
PCM
48 kHz, 20 bit linear
PCM
48 kHz, 16 bit linear
PCM
48 kHz, 16 bit linear
PCM
44.1 kHz, 16 bit linear
PCM
44.1 kHz, 20 bit linear
PCM
Playback discs
Digital audio output
BITSTREAM LINEAR PCM
D
D
S
A U D I O
I G I T A L O U T P U
S E
R C
U R R O U N D D O L
T U P
T B I T S T R M
S T A N D A
B Y
S P E A K E R O P T I O N S
P R O L O G I C
R D T V
S E L E C T : +
R E T U R N : S E T U P : F I N I S H
To output
the digital
audio signal
as it was
recorded
To convert
the bitstream
signal to the
linear PCM
signal and to
output it
O U T P U T T Y P E
B I T S T R E A M
L I N E A R P C M
S E L E C T : +
R E T U R N : S E T U P : F I N I S H
RC RC
When selecting the DIGITAL OUTPUT
RC RC
ENGLISH