Sony Cyber-shot DSC-G1 - Manual (Page 116)

116
Warning indicators and messages
Internal memory formatting error
Memory Stick formatting error
• Format the media again (pages 57 and
59).
Memory Stick locked
• You are using the “Memory Stick Duo”
with the write-protect switch, and the
switch is set to the LOCK position. Set
the switch to the recording position
(page 120).
No memory space in internal
memory
No memory space on Memory Stick
• Delete unnecessary images or files
(page 23).
Not enough space in internal
memory to store album images
• Delete unnecessary data in the internal
memory. This is because the camera
records Album Images in the internal
memory even when you use a “Memory
Stick Duo”.
Read only memory
• Your camera cannot record or delete
images on this “Memory Stick Duo”.
No file
• No playable images have been recorded
in the internal memory.
Folder error
• A folder with the same first three digit
number already exists on the “Memory
Stick Duo” (for example: 123MSDCF
and 123ABCDE). Select another folder,
or create a new folder (pages 57, 58).
Cannot create more folders
• The folder with a name beginning with
“999” exists on the “Memory Stick
Duo”. You cannot create any folders if
this is the case.
Cannot record
• The camera cannot record images in the
selected folder. Select a different folder
(page 58).
File error
• An error occurred while the image or
music file was playing back.
File protect
• Release the protection (page 48).
Image size over
• You are playing back an image of a size
that cannot be played back on your
camera.
Invalid operation
• You are trying to play back or edit a file
that is not compatible with the camera.
(Vibration warning indicator)
• Camera shake may occur due to
insufficient light. Use the flash, turn on
the anti-blur function, or mount the
camera on a tripod to secure the camera.
Check other device
• [USB Connect] is set to [PictBridge],
however the camera is connected to a
non-PictBridge compliant device.
Check the device.
• The connection is not established.
Disconnect and connect the USB cable
again. If an error message is indicated
on the printer, refer to the operating
instructions supplied with the printer.