Sony Cyber-shot DSC-G1 - Manual (Page 95)

95
Us
ing
a
ne
tw
or
k
Viewing images via a Wireless LAN
With a DLNA-enabled TV set, you can
view the images stored in this camera via an
access point without connecting the devices
via an A/V cable.
• If the access point has already been configured,
you can skip steps 2 through 5.
1
Turn on the camera and the TV.
2
Select [ ] (Settings)
t [
Network]
t [Access Point] with
the control button, then press
z.
3
Select [Auto Scan] with the
control button, then press
z.
The search result is displayed.
• If the access point cannot be detected,
perform [Manual Settings] (page 70).
4
Select the desired access point
with the control button, then
press
z.
5
When a password is required,
enter the password, select [Exit]
with the control button, then
press
z.
Select [Password], then press
z. The
character input tool appears. Enter the
password. Select [OK], then press
z.
6
Select [ ] (Toolbox)
t
[ Share Images] with the
control button, then press
z.
7
Select [OK] with the control
button, then press
z.
The image selection screen appears.
• It may take several seconds to a few minutes
to establish a connection.
HOME button
MENU button
Control button