Sony DVS-9000 - Manual (Page 227)

227
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB06C04-WW.fm masterpage:Right
Key Setting Operations With the Key Control Block
Chapter 4
K
e
ys
DVS-9000/9000SF
3-704-674-01 (1)
When [Mix Color] is on, and the [MORE] button is lit amber
When [Mix Color] is on, and the [MORE] button is lit green
When using the key fill bus signal: Press the [MATTE FILL] button, turning
it off. To select the key fill signal, use the key row in the cross-point control
block.
Selecting key source
• To use the key source paired with the key fill signal selected on the key fill
bus, press the [AUTO SEL] button, turning it on. The pairing of the cross-
point buttons for key fill and key source is carried out in the Setup menu. (See
“Cross-Point Settings (Xpt Assign Menu)” in Chapter 16 (Volume 2).)
• To select key source independently of the key fill signal selected on the key
fill bus and paired with key source, hold down the key delegation button
[KEY1], then press the desired button in the cross-point control block.
• To use as key source the same signal as the key fill signal selected on the key
fill bus, select the SELF mode by pressing the [AUTO SEL] button and
[SPLIT] button simultaneously so that both are off. When chroma key is
selected as the key type, select the SELF mode.
Key Edge Modifications
To apply a modification to the key edge, press one of the edge type selection
buttons in the key control block.
[BDR] button: border
[DROP BDR] button: drop border
[SHDW] button: shadow
[OUTLINE] button: outline
[EMBOS] button: emboss
Knob Parameter Adjustment Setting values
1 Luminance Color 1 luminance 0 to 100
2 Saturation Color 1 saturation 0 to 100
3 Hue Color 1 hue 0 to 359
4 Size Pattern size 0 to 100
Knob Parameter Adjustment Setting values
1 Luminance Color 2 luminance 0 to 100
2 Saturation Color 2 saturation 0 to 100
3 Hue Color 2 hue 0 to 359
4 Soft Edge softness 0 to 100