Southbend SLEB/10CCH - Manual (Page 18)

I
NSTALLATION E LECTRIC C ONVECTION O VENS
4. Attach either the shelf or the two channel frames (depending on which option was ordered) as shown in
the drawing below. Use the screws and four clips provided to secure the shelf or channel frames to the
rack guides.
INSTALLATION
5. Attach the rack-stop using two screws. Attach the top of the rack stop to the bottom of the oven, and
the bottom of the rack stop to the bottom shelf or the rear channel frame, as shown in the following
drawing.
P AGE 18 O PERATOR ’ S M ANUAL 1181958 REV 2