Southbend SLEB/10CCH - Manual (Page 27)

E LECTRIC C ONVECTION O VENS
O
PERATION
Control Panel of PROGRAMMABLE Models
LIGHTS
POWER
ON
OFF
HEAT ON
START
TIMER
ACTUAL
TEMP
PGM
4
PGM
1
HOLD
CANCEL
EVENT
#
PGM
5
PGM
2
FAN
CON/CYC
PGM
MODE
ON/OFF
PGM
3
COOK
HI/LO
FAN
TIME TEMP
Power Switch
Use to switch oven on or off.
Heat-On Indicator
Lit when the burners are operating.
Temperature Setpoint Display
Indicates temperature setpoint.
Flashes until setpoint is reached.
Hold Mode Indicator
Indicates that a Hold Mode has
been programmed.
Fan Speed Indicator
Indicates whether fan speed is set
to high (COOK) or low (ROAST).
Time Display
Displays remaining cook time for
the running program.
Programs Indicators
One of these indicators will be
displayed indicating which program
is running.
Temperature Knob
Turn to set the desired cooking
temperature.
Time Knob
Turn to set the desired cook time.
Program Buttons
Press to select the corresponding
recorded program, then press the
Start Timer button. Also used when
recording a program to specify
which program to record.
Cancel Button
Press to cancel a running program,
to silence the alarm that occurs
when a timed cook ends, or to exit
Hold Mode.
Fan Speed Button
Press to select whether fan runs at
high or low speed.
Fan Mode Button
Press to select continuous or
cycling fan mode.
Actual Temperature Button
Press to display the actual interior
oven temperature instead of the
desired temperature.
Start Timer Button
Press to start a timed cook period,
or to start a recorded program.
Hold Mode Button
Press to select whether oven enters
Hold Mode at end of cook time(s).
Programming Buttons
Use to record cook programs. See
instructions on next page.
Fan Mode Indicator
Indicates when fan mode is set to
CYCLE rather than continuous.
Oven Interior Light Switch
Press to turn on the oven interior
light. Light remains on for as long
as the switch is held.
OPERATION
O PERATOR ’ S M ANUAL 1181958 REV 2 P AGE 27