Sennheiser S-MCD 3000 HP - Manual (Page 63)

63
3 Including a new frequency in the frequency list
1. Enter the new frequency into the left-hand field below the frequency list.
2. Enter any desired channel number into the right-hand field under the frequency list.
3. Mark the line in the frequency list in which the new frequency is to be entered.
4. Click onto the “Place” button” in order to enter the frequency at the desired place.
or
1. Mark a frequency in the frequency list.
2. Click onto the “Edit” button. The frequency and the channel number are now taken
over into the two fields below the frequency list.
3. Now alter the channel number or the frequency as desired.
4. Now click onto the line in the frequency list at which you would like to enter the
altered frequency/channel number.
5. Click onto the “Place” button in order to carry out the alteration at the desired
place.
4 Deleting a frequency from the frequency list
1. Mark the frequency which you would like to delete from the frequency list.
2. Click onto the “Delete” button. The frequency and the channel number are now
removed from the list.
NOTE
When the list comprises only one frequency, this cannot be deleted. If you attempt you delete this
frequency, an error message is generated. The frequency is not deleted.