Replacing the battery in the remote – Sony CMT-EX100 User Manual

Page 7

Advertising
background image

7

Getting Started

3

Connect the AM antenna.

Set up the AM loop antenna, then connect
it.
Connect the white cord to the U terminal,
and the red cord to the other terminal.

AM loop
antenna

White

Red

4

Reinstall the rear cover.

Put the wires through the hole at the bottom
of the rear cover.

5

Connect the power cord to the wall
outlet after you complete all the
connections.

6

To use the remote, pull out the
insulating sheet to allow power to flow
from the battery.

The remote already contains a battery.

Note on the glass cover of CD player

The CD player cover is made of tempered glass.
Under normal conditions, this tempered glass is
more shock resistant and able to bear more weight
than ordinary glass. This glass, however, may
shatter if it receives a sharp blow or if it is
scratched.

To connect optional components

See “Optional Components” on page 16.

Advertising