Sony DVP-LS785V EN - Manual (Page 30)

30
12
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 24 to
26 (
through ).
• D-PCM (page 86)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 86)
13
Press ENTER.
“DTS” is selected.
14
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 24 to
26 (
through ).
• D-PCM (page 86)
• DTS (only if the amplifier (receiver)
has a DTS decoder) (page 86)
15
Press ENTER.
◆ When “DIGITAL OUTPUT” is selected
in step 11
• Quick Setup is finished and
connections are complete.
• If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (86).
◆ When “DIGITAL & 5.1CH OUTPUT” is
selected in step 11
• The Setup Display for “SPEAKER
SETUP” appears.
16
Press X/x to select the size of the
centre speaker.
If no centre speaker is connected, select
“NONE” (87).
17
Press ENTER.
“REAR” is selected.
18
Press X/x to select the size of the
rear speakers.
If no rear speaker is connected, select
“NONE.”
B D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
AUDIO FILTER: SHARP
ON
DOWNMIX: DOLBY SURROUND
D-PCM
D-PCM
48kHz/96kHz PCM: 48kHz/16bit
DTS: DOLBY DIGITAL
B-2 C-2
D-2
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
AUDIO FILTER: SHARP
ON
DOWNMIX: DOLBY SURROUND
D-PCM
PCM
D-PCM
48kHz/96kHz PCM:
DTS:
DTS
48kHz/16bit
D-PCM
B D
B-2 C-2
D-2
SPEAKER SETUP(DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF TEST TONE:
FRONT:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER: LARGE
YES
SMALL
NONE
LARGE
SPEAKER SETUP(DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF TEST TONE:
FRONT:
CENTER:
LARGE
REAR:
SUBWOOFER: LARGE(REAR)
YES
LARGE
LARGE(REAR)
LARGE(SIDE)