Sony DVP-LS785V EN - Manual (Page 31)

31
H
ook
up
s
19
Press ENTER.
“SUBWOOFER” is selected.
20
Press X/x to select whether or
not you have connected a
subwoofer.
21
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 86).
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 24 to
26 (
through ). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
See page 80 for using the Setup Display.
Audio Connection (pages 24 to 26)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 85).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 85).
• Set “DIGITAL OUT” to “ON” (page 85).
• Set “DISTANCE,” “LEVEL (FRONT),”
and “LEVEL (REAR)” according to the
connected speakers (page 88).
z Hints
• For connections
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 86).
• For connections
If the sound distorts even when the volume is
turned down, set “AUDIO ATT” to “ON”
(page 85).
• For DVP-NS955V
The speaker size you set in steps 16 through 20
will also adjust the Super Audio CD speaker size
of “SPEAKER SETUP.” If you want to change
the speaker size for Super Audio CDs, you can set
in “SPEAKER SETUP” (page 87).
SPEAKER SETUP(DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF TEST TONE:
FRONT:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
ENTER
DISPLAY
YES
LARGE(REAR) NONE
YES B D
A
B-1 C-1
B-2 C-2 D-2
D-1
B-2 C-2 D-2
B-1 C-1 D-1