Silex technology Multicast Video Distribution System MVDS X-1 - Manual (Page 47)

3.Monitor and Maintenance
41
To enter into LEVEL2 in ADMIN MODE MENU, the PIN CODE is required (In the
factory default setting, the PIN CODE is "0000").
PIN CODE entry screen
ADMIN:PIN CODE
PIN CODE? 0 _ _ _
Enter the PIN CODE.
To enter the PIN CODE, select each number by pushing [ + ] and [ - ] buttons and
save it by pushing [SET] button. If a correct PIN CODE is entered, configuration
menus are displayed. If a wrong PIN CODE is entered, the error message, "WRONG
PIN CODE!" is displayed and the LCD menu returns to LEVEL 1.
Each configuration menu in ADMIN MODE MENU are explained as follows.
LCD CONTRAST
Sets a contrast for LCD.
LCD CONTRAST screen
LCD CONTRAST
-> 3 . . . | . . . . .
Enter a value.
Select the value by pushing [ + ] and [ - ] buttons and determine it by pushing
[SET] button.
NETWORK CONFIG
Configures the network settings.
Menu Information
IP DHCP/BOOTP Displays whether DHCP/BOOTP are enabled or disabled.
IP ADDRESS(CFG) Displays an IP Address.
IP SUBNET ADDR Diplays a Subnet Mask.
IP GATEWAY ADDR Displays a Default Gateway Address.
NETWORK CONFIG (sample)
IP DHCP/BOOTP
ENABLE
Selected menu
Current setting of the selected menu