Silex technology Multicast Video Distribution System MVDS X-1 - Manual (Page 66)

60
MVDS X-1 User's Guide
Configures Static Node control for receivers. Usually, the default settings are used.
Static Node (at receiver)
Name Details
Node
Configuration
Node List Method Specify a node search method.
Switch source interval
Set a time interval to switch the MVDS transmitter
automatically when two or more transmitters are installed
to the network.
Static Node 0
Specify an IP address for node when Node List Method is set
to Static.
Static Node 1
Static Node 2
Static Node 3
Static Node 4
Static Node 5
Static Node 6
Static Node 7
- Use this only for irregular situations such as when you need to specify a node for your
network environment or you need to switch the transmitter every certain period of time.
Usually, the default settings are used.
<Static Node>
Use this when you specify the contents (transmitter) or switch it every certain period of time.
<Dynamic Node>
Use this when you switch the group manually.
Note