Servis-Rhino F-4123C - Manual (Page 36)

ASSEMBLY
1585 01/11 Assembly Section 3-2
© 2011 Alamo Group Inc.
ASSEMBL
Y
Dismounting and Mounting Mid-Mount Loader
To avoid injury during installation of loader, do not allow bystanders within 10 feet of loader
or attachment.
Always have a heavy attachment, such as a bucket mounted on loader when it is removed
from tractor.
Always use a drift and hammer made of non-sparking material (a shot-filled mallet is
recommended) to install or remove pins. A steel hammer or drift could generate flying metal
fragments and result in injury. Always wear safety glasses when using a hammer to remove
or install pins.
Always have a heavy attachment, such as a bucket mounted on loader when it is removed
from tractor.
It is important not to put excessive weight on parking stands with lift cylinder retraction.
Damage may result.
Never allow anyone to get under the loader or attachment or to reach
through the loader lift arms when raised. Serious injury could result from
crushing or pinching by the loader or attachment.
(SL-06)
Make sure the loader is properly attached to the tractor and the retaining pins securely lock
the loader into position. Improper mounting of the loader onto the tractor can result in the
loader falling causing serious injury.
(SL-23)