Servis-Rhino F-4123C - Manual (Page 78)

OPERATION
1585 01/11 Operation Section 4-32
© 2010 Alamo Group Inc.
OPERA
T
ION
It is important to keep the bucket level when
approaching a bank or pile. This will help prevent
gouging the work area.
PEELING AND SCRAPING
Use a slight bucket angle, travel forward and
hold lift control forward to start the cut. Make a
short 5 to 8 foot angle cut and break out cleanly.
With bucket level, start a cut at notch
approximately 2 inches deep. Hold depth by
feathering bucket control to adjust cutting lip up
or down. When front tires enter the notch, adjust
lift cylinder to maintain proper depth.