Sennheiser 2015 - Manual (Page 13)

65
Indications and displays on the transmitter
Battery status indication
The 4-step battery status display ቦ on the display panel and the red LED ᕤ
provide information on the capacity of the BA 2015 battery pack or the bat-
teries:
MUTE indication
The red LED ᕤ lights up constantly when the microphone of the transmitter
is muted.
Audio peak indication
The yellow LED ᕥ should only light up briefly during peak level passages.
When it lights up constantly, the line or microphone input level is too high.
Alphanumeric display
After switching on the transmitter, the alphanumeric display ቢ first dis-
plays the name of the transmitter. After approx. three seconds, the stan-
dard display appears, indicating the channel bank (1) and the channel (01).
ᕤ
ᕥ
ቦ
3 segments: capacity approx. 100 %
2 segments: capacity approx. 70 %
1 segment: capacity approx. 30 %
Battery status display
and red LED flashing: LOW BAT (you should immediately replace
the battery pack or the batteries)
ቢ