Sennheiser 2015 - Manual (Page 27)

79
After switching on the transmitter, the name of the transmitter is first dis-
played. After approx. three seconds, the standard display appears.
Getting into the operating menu
̈
Press the SET button to get from the standard display into the opera-
ting menu. The last selected menu flashes on the display.
Selecting a menu
̈
Press the
̆
/
̄
rocker button (UP/DOWN) to select a menu.
̈ Press the SET button to get into the setting mode of the selected menu.
The current setting that can be adjusted flashes on the display.
Adjusting a setting
̈
Press the
̆
/
̄
rocker button (UP/DOWN) to adjust the setting.
By briefly pressing the ̆ / ̄ rocker button, the display jumps either
forwards or backwards to the next setting. In the “ SENSIT ” and
“ CHAN ” menu, the ̆ / ̄ rocker button features a “fast search”
function: If you hold down the
̆
or
̄
button, the display cycles
continuously, allowing you to get fast and easily to your desired
setting. The new setting flashes on the display until it is stored.