Sennheiser 2015 - Manual (Page 15)

67
Preparing the units for use
Transmitter and receiver have been adapted by your technical expert to suit
your individual applications.
Transporting the transmitter and receiver
In addition to the EZB 2015 system case offering room to store all compo-
nents of the system, delivery also includes a transport case. This is suitable
for the day-to-day transport of a transmitter and a receiver and of two
replacement battery packs.
Push the transmitter and the receiver into the transport holding device as
shown on the left. The units fit snugly in the case preventing damage dur-
ing transport. It is possible to store the battery packs in the front pocket of
the transport case, as well as in the transport holding device.
Inserting the battery pack/batteries
(transmitter and receiver)
For powering the units, we recommend using the supplied BA 2015 battery
pack. The battery pack can be recharged in the L 2015 charger while
remaining in the transmitter or receiver (see operating manual of the
charger). If no power supply is available for recharging the battery pack,
you can alternatively use 1.5 V AA size batteries.
̈ Press the two unlocking buttons ¸ and open the battery compartment
cover µ .
̈ Insert the battery pack or the batteries as shown on the left. Please
observe correct polarity when inserting the battery pack or the batte-
ries.
̈ Close the battery compartment. The battery compartment cover locks
into place with an audible click.
Transport holding
Transport
case
device
µ
µ
¸