Sony XC-003 - Manual (Page 42)

46
PAGE 2
H. PHASE 00 >
Menu Settings
FRM/FLD (frame/field)
Switches the charging mode.
FRM : Mode in which the CCD builds up a charge frame
by frame. High vertical resolution makes it ideal for
still shots.
FLD : Mode in which the CCD builds up a charge field by
field. Suitable for obtaining unblurred images when
shooting an object moving at high speed.
H. PHASE (horizontal phase)
Lets you adjust the horizontal phase when the camera is
controlled with an external sync signal. The setting range
is 00 through 30. When the external sync signals are not
used, the parameter setting does not change even if the
DATA UP or DATA DOWN button is pressed.
GAMMA (gamma offset)
Offsets the camera input signals to compensate for the
luminance characteristics of the cathode ray tube in
relation to the input level. This provides better
reproduction of dark parts of an image.
ON : Offsets input signals. This is the normal setting.
OFF : This setting is used when signals that have not been
offset are required for image processing.
DTL (detail)
Sharpens the outline of the image shot by the camera. RGB
signals do not contain DTL signals.
ON : Emphasizes and sharpens the image outline.
OFF : The DTL function does not operate.
G.SYNC
ON : Sync signals are added to the G signals.
This setting is used when you use a monitor without a
sync signal input connector.
OFF : The G signals are output without sync signals.