Source Technologies 1352 MICR 40 - Manual (Page 39)

Secure MICR Printer User’s Guide
©
Source Technologies
July 2003 Page 35 All rights reserved
point, and no alpha characters. For example:
Valid Formats Invalid Formats
“$1,234,567.89” “$1,23,”
“4321234.56” “432.123”
“5,321” “34 test”
“$.89” “12$123”
If the value in field 4 is in an invalid format, that line will have a question mark to the right of
the field and it will not be added to the total. Under these circumstances, the total will print
with the notation “Fields flagged with ‘?’ not included in total.”
If the total exceeds $4,294,957,295.99 the printer will print an error message “Total exceeds
maximum value” instead of the total.
Print Audit Report
Prints an Audit Trail Report.
The Audit Trail Report is also part of the command set so the Audit Report can be printed
and purged via the host application. As a security control mechanism, purging is only
possible after entering a valid password.
The printer can store approximately 6,000 records or checks for each megabyte of flash. If
the Audit Report feature is activated, and the printer’s flash memory becomes full, an error
condition occurs. The printer will stop printing and prompt the operator to print and purge the
Audit Report memory. See the following section for purge instructions.
Section 8: Audit Trail Reports