Source Technologies 1352 MICR 40 User Manual
Page 47
Secure MICR Printer User’s Guide
©
Source Technologies
July 2003
Page 43
All rights reserved
&%1B(3@
PCL command to return to the default font.
&%1B$&f0S
PCL command to push (store) the current cursor position.
&%1B$*p296x3184Y
PCL command to move the cursor to 296X, 3184Y. At 300
dpi, this is .97 inches across and 10.61 inches down. We
are precisely positioning the MICR line.
&%SMD...$
Print E-13B MICR command. Prints the MICR line and
stores the MICR line information in the second position in
the Audit Report.
&%1B$&f1S
PCL command to pop (return) the cursor to the pushed
position.
&%SQ710:33:45 AM$
Here we send the time of print to the printer. The data is
recorded in the Audit Report but this field is not printed on the
page.
&%STORE$
Signals the end of a check and the end of Audit Report
recording.
&%??!!
Turns Hex Transfer off.
Section 8: Audit Trail Reports