Stellar Industries SI-60 - Manual (Page 69)

63 Assembly Drawings 63
truck frame, clamp to truck frame using shims if needed. Drill three (3) 5/8" holes through
cab guard and truck frame approx. 3" apart (both sides). Bolt cab guard to truck frame.
Adjust position on truck frame to protect window & back of cab. Square cab guard with
FRAME RAIL
ITEM PART DESCRIPTION QTY.
1 47262 CAB GUARD WLDMT KP60 1
2 47265 FLAT 0.25X2.00X10.50 2
3 47264 CLAMP BAR CAB GUARD KP60 2
4 2826 NUT 0.63-11 HHGR5 NYLOC 8
5 2827 CAP SCR 0.63-11X4.00 HHGR5 2
6 C0964 CAP SCR 0.63-11X3.50 HHGR5 6
7 C1038 WASHER 0.63 USS FLAT ZINC 6
6
7
1
4
3
5
4
2
PN 47263
Cab Guard - PN 47263