Stellar Industries SI-60 - Manual (Page 23)

17 Specifications 17
Chassis C.T.: See chart on next page.
Frame Width: 35-1/2”
Minimum GVWR: 18,000 lbs. Front, 44,000 lbs. Rear
Frame Height: 43”
Sub-Frame: Full length 2 x 4 Tube
Load Rating: 60,000 lbs., 75,000 lbs.
Dump Angle: 47º
Operating Pressure: 1,850 PSI (60,000 lbs), 2,150 PSI (75,000 lbs)
Gear Pump: 35 GPM @ 1,500 RPM
Operation: Inside Cab Cable Controls Standard
Weight: 6,400 lbs. - 7,400 lbs.
Cylinders: Twin Double Acting
6 x 72
Lift Model SI-60/75
7 x 80 Reeving Model SI-60/75
7 x 90 Reeving Model SI-60/75
Low Pressure Hydraulic System
Gear Driven Hydraulic Pump
Large 3” Rear Pivot Pin
Hold-down compatible with ANSI Z245.6 Type “U” Containers
Chapter 4 - Specifications