Sharp AR-203E - Manual (Page 50)

48
CLEANING THE UNIT
Proper care is essential in order to get clean, sharp copies. Be sure to take a few
minutes to regularly clean the unit.
Cabinet
Wipe the cabinet with a soft, clean cloth.
Original table and the back side of the original cover and
SPF (if installed)
Stains on the glass, scanning window, cover or SPF roller will also be copied. Wipe
the glass, scanning window, cover or SPF roller with a soft, clean cloth. If necessary,
dampen the cloth with a glass cleaner.
Do not spray flammable cleaner gas. Gas from the spray may come in
contact with the internal electrical components or high-temperature parts
of the fusing unit, creating a risk of fire or electrical shock.
• Before cleaning, be sure to turn the power switch off and remove the
power cord from the outlet.
• Do not use thinner, benzene or other volatile cleaning agents. Doing
so may cause deformation, discoloration, deterioration or malfunction.
Original table/scanning window
Original cover/SPF
SPF roller
SPF scanning window