Sharp AR-203E - Manual (Page 61)

59
8
IF A PAPER MISFEED OCCURS IN THE MAIN UNIT
WHEN USING THE SPF
If a paper misfeed occurs in the main unit paper path when making copies with
original(s) through the SPF, the SPF will automatically stop scanning. Manually
remove the misfed paper(s) in the main unit. You can check the number of originals
that must be returned to the document feeder tray in the display on the operation
panel. Follow the steps below to display the number of originals to be returned.
1
When a paper misfeed occurs in the
main unit, the SPF stops and the ZOOM
indicator blinks.
The remaining number of sets will blink in the
display.
Be sure to remove misfed paper(s) at the main
unit paper path first. Then follow the step 2
onwards.
2
Remove any originals that have not yet
been scanned from the document
feeder tray.
For the original(s) stuck in the SPF, do not
remove manually. This may cause a machine
malfunction. See the step 3.
3
Press the copy ratio display (%) key.
The originals that were being scanned in the SPF
will be discharged and the number of original
sheets to be returned will blink in the display.
Place the displayed number of original sheets
back in the document feeder tray together with
the original sheets removed in step 2.
The following procedure omits removal of the misfeed. Be sure to remove
the misfeed before displaying the number of originals to be returned. For
the misfeed removal procedure, see "MISFEED REMOVAL" (p.52).
If "SPF automatic original discharge time" is enabled in the user
programs, the originals in the SPF will be automatically discharged after
the set time elapses. ("USER PROGRAMS" (p.43)
A5 A4
A4 B5
A4 A5
A5 A4
A4 B5
A4 A5
A4
B5
A5
Display of number of original
sheets to be returned