Siemens CX203isdn - Manual (Page 120)

119
Operating with other devices
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005
Registering a Gigaset 4000 Comfort/Micro handset
Registering a Gigaset 4000 Classic handset
After entering the system PIN, the handset searches for a base station with that PIN.
During this search, Register H/Set flashes in the display. After registration the handset
reverts to idle status. Your handset is now ready to use!
The next unassigned internal number between Int.11 and Int.16 is automatically
assigned to the handset when it is registered.
a
Hold down to turn on the handset.
either ...
OK
Confirm the prompt.
or ...
G
Settings OK
Select the menu item and confirm.
G
Register H/Set OK
Select the menu item and confirm.
G
Base 1 OK
Select base (1–4) and confirm, e.g. Base 1.
... then
~
OK Enter the system PIN of the base (the default is 0000)
and confirm.
s
INT11: Int.11 OK Select internal number and confirm, e.g. INT11:
Int.11
. Successful registration is confirmed on the
display.
i You can register a maximum of four Gigaset 4000 Classic handsets.
Register Gigaset 4000 Classic handsets before any other handsets.
MENU Open the menu.
s
Register H/Set OK Select the menu item and confirm. PIN is displayed.
~
OK Enter the system PIN of the base (the default is 0000)
and confirm.