Siemens CX203isdn - Manual (Page 97)

96
System settings
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005
Assigning an MSN a ringer melody
Each receive MSN is assigned a ringer melody when setting up. You can change this
assignment for each receive MSN individually. This means that all terminals will use this
ringer melody to indicate an incoming call to a receive MSN.
Setting up rejecting for the entire MSN group
You can reject an external call not only on your base station, but for all members of an
MSN group. Pressing REJECT will give the caller a busy signal instead of a ringing tone.
The entire group will no longer be called. A waiting call can also be rejected during a
call. The call is added to the caller list.
By factory default, the function is not activated.
i
In place of ringer melodies 1-20, you can also assign the "Device ringer"
to an MSN. The handsets assigned to the receive MSN will then use the
ringer melody set on the handset for external calls (page 112).
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
ISDN settings Select the menu item and confirm.
Set up MSN Confirm.
s
MSN1:
W Select MSN and open submenu, e.g. MSN1: Anna.
s
Ringer melody Select the menu item and confirm.
u v
Select melody (1 – 10, Device ringer) and confirm,
e.g. Ringer melody: 5.
j
Hold down (back to idle status).
OK
OK
OK
OK
OK
OK
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
ISDN settings
Select the menu item and confirm.
s
Reject all
Select the menu item and confirm (
‰
= activated).
j
Hold down (back to idle status).
OK
OK
OK
OK
OK