Siemens CX203isdn - Manual (Page 83)

82
Setting the answering machine (on CX253isdn)
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005
Activating/deactivating automatic pick up
With automatic pickup you can take a call directly from the answering machine (during
announcement or recording) on any handset or by lifting a receiver (telephone with
cord) providing the same receive MSN is assigned to all devices. You just need to press
the talk key c on the handset. The recording of the call will then stop.
As supplied, automatic pickup is activated.
Preconditions:
◆ To pick up a call, the terminal requires a minimum of Incoming only authorisation
(page 90).
◆ The same receive MSN is assigned to both the answering machine and the terminal.
Activating/deactivating automatic notification via text message
When you receive new messages on the answering machine your telephone can
automatically send a text message to you on an external phone number (e.g., to a
mobile phone). A text message of this kind will read, for example:
New message: 01712205625 for office at 18:27 hrs on TH, 10.12.04. You have
2 new AM message(s).
Automatic text message notification is not available in all countries.
i If automatic listen in is activated for a handset (page 81) then the call can
only be taken on this handset.
i
Open the menu.
s
Set base Select the menu item and confirm.
s
Settings Select the menu item and confirm.
s
System settings Select the menu item and confirm.
s
AM auto. pickup Select the menu item and confirm (
‰
= activated).
OK
OK
OK
OK
i
To send the SMS, an SMS send centre must be entered (page 49).