Siemens CX203isdn - Manual (Page 19)

18
Preparing the base station for use
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005
Using with a PABX:
Only carry out the following steps if you want to connect your telephone to a private
PABX (not directly to a NTBA). Depending on the PABX, it may be necessary for you to
enter an access code (outside line code) for external calls during installation; refer to the
operating instructions for your PABX for details. You can enter an access code (one to
four digits).
The display shows: Operate behind PABX?
The display shows Installation completed. Press the End call key to return the handset
to idle status.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR] YES
Press the display key to confirm the prompt.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR] YES
Press the display key to confirm the Set access
code?
prompt.
~ Enter the access code (outside line code).
W Press the display key to open the submenu.
Save entry
Select the menu item and confirm. The Getting
started wizard is closed.
OK