Siemens CX203isdn - Manual (Page 103)

102
System settings
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005
By default, automatic call diversion is not set up.
The set up call diversions for which automatic diversion is set are indicated in the call
diversion list.
Setting up an internal group call group
You can make a group call from any telephone registered on the base station to all other
registered internal users (page 20).
By default, all registered users with the device type Telephone or Neutral are set up in
the group call group.
i
Open the menu.
s
Set base Select the menu item and confirm.
s
Settings Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
ISDN settings Select the menu item and confirm.
s
Auto.forwarding Select the menu item and confirm.
s
MSN1:
W Select MSN and open submenu, e.g. MSN1: Anna.
~
W Enter destination number and open the submenu.
Save entry Confirm. Automatic call diversion is activated
( ‰ = on).
j
Hold down (back to idle status).
OK
OK
OK
OK
OK
OK
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
Setup user
Select the menu item and confirm.
s
Setup device
Confirm.
s
INT11: Int.11
W Select internal number and open submenu,
e.g. INT11: Int.11.
s
Hunt group Select the menu item and confirm (
‰
= activated).
j
Hold down (back to idle status).
OK
OK
OK
OK
OK
OK