Siemens CX203isdn - Manual (Page 116)

115
Setting the volume, display and keys
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_tel.fm / 14.11.2005
Assigning call diversion to a function key
You can assign an immediate call diversion to a function key; the general diversion path
set for call diversion is then applicable (page 97).
Precondition: You have assigned the function key (page 113).
Assigning a send MSN to a function key
You can use the send MSN to specify which phone number you want to use for the next
call. Dialling this send MSN using the function key only applies to the next outgoing call.
Precondition: You have assigned the function key (page 113).
Assigning identify caller (MCID) to a function key
Identify caller (page 26) is used to identify annoying or threatening callers.
Precondition: You have applied for Identify caller with your network provider.
Activate this function during the call or immediately after the caller has hung up. You
must not end the call yourself.
... then
s
ISDN Functions
Select the menu item and confirm.
s
Forward immediat
Select the type of call diversion and confirm,
e.g. Forward immediat.
s
MSN1:
Select MSN and confirm, e.g. MSN1: Anna.
~
W Enter the phone number and open the submenu.
Save entry Confirm.
OK
OK
OK
OK
i
◆ After this function key is pressed, the display shows the specified
phone number. Call diversion is activated.
◆ Pressing the function key again deactivates the call diversion.
... then
s
ISDN Functions Select the menu item and confirm.
s
MSN next call Select the menu item and confirm.
s
MSN1: Select MSN and confirm, e.g. MSN1: Anna
( ‰ = set).
OK
OK
OK
... then
s
ISDN Functions Select the menu item and confirm.
s
Identify caller Select the menu item and confirm.
OK
OK
i
You may not replace the receiver!