Registering/de-registering with an sms centre, Memory – Siemens CX203isdn User Manual

Page 51

Advertising
background image

50

SMS (text messages)

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005

Registering/de-registering with an SMS centre

In order to be able to receive text messages on your phone you must first register your

phone number with an SMS service provider. You can find out from the service provider

concerned which information you need to send to register and de-register.
The phone number of the SMS centre must be entered and activated as the active send

service centre in order to register with them.
After you have registered, remember to re-activate the SMS centre as the send centre

via which you wish to send text messages.

Memory

The number of text messages that can be stored by the base station depends on the size

of the messages. The memory is used for the incoming and outgoing message list. If the

memory is full, the message Text list full! Please delete entries is displayed. Delete

text messages you no longer require from the incoming and outgoing message lists.
You can check how much capacity your SMS memory has left (in %).

i

Make sure that you register the phone number (MSN) that is assigned to

the base station as the send MSN (page 94), and with which you are

sending the text message. If you also want to send and receive text

messages using other registered handsets with different send MSNs, then

you must also have these phone numbers registered.

i

Open the menu.

SMS

Confirm.

s

Available memory

Select the menu item and confirm. The available

memory will be displayed (in %).

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

Back

Press (back to idle display).

OK

OK

Advertising
This manual is related to the following products: