Siemens CX203isdn - Manual (Page 78)

77
Setting the answering machine (on CX253isdn)
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005
Setting the recording time and recording quality
You can set the maximum length of a message and its recording quality. The recording
quality determines the total recording time of your answering machine.
On the High quality setting the total recording time is up to 12 min, on Long
recording
(standard quality, generally adequate) up to 25 min. The Long recording
recording quality and the Maximum recording time are set by factory default.
Setting the recording time
You can limit the maximum length of a message to 1 minute, 2 minutes or 3 minutes.
If you set Maximum for the recording time (factory setting) then it is "unlimited" (until
the memory is full).
Precondition: You have selected an answering machine (page 61).
Setting recording quality
Precondition: You have selected an answering machine (page 61).
i
The recording of a call ends:
◆ after a pause in speaking lasting more than 8 seconds;
◆ at the end of a call; the caller terminates the connection;
◆ after the maximum set recording time has elapsed, if the setting
Maximum
was used, when the memory is full.
s
Settings
Select the menu item and confirm.
Message/Memo Confirm.
Message length Confirm.
s
Maximum Select the recording time and confirm,
e.g. Maximum (
‰
= activated).
j
Hold down (back to idle status).
OK
OK
OK
OK
i
When the recording duration is reached, the concluding announcement
is played automatically, if recorded. Then the connection is closed down.
There is no limit to the duration of memo recordings.
s
Settings Select the menu item and confirm.
s
AM quality Select the menu item and confirm.
either ... Set high quality:
High quality Confirm (
‰
= activated).
or ... Set long recording:
s
Long recording
Select the menu item and confirm (
‰
= activated).
j
Hold down (back to idle status).
OK
OK
OK
OK